| Water
Block |
Patent
Pending |
Dim:
70x50x12 mm
Material: Copper Forging/ Nickel Plating
Weight: 266g |
| Features: |
1.
Made by pure copper and with high
conductivity.
2. 3D water channel enhance the heat
conduction and convection.
3. Radiate water block spread the
heat from the center. |
|
|
| Universal
Clip |
| Application
for Intel P4 478 FMB2 and AMD K7, K8
|
 |
|
| Copper
Radiator |
 |
Dim:
86x130x89 mm
Material: Copper Pipe with Staged
Copper Fin
Fan Dim: 80x80x25 mm
Fan Rated Voltage: 12V
Fan Rated Current: 0.14A
Fan Power Input: 1.68W
Fan Speed: 2400 ± 10% RPM
Max. Air Flow: 38.4 CFM
Noise: 22 dBA
Life Expectancy: 50000 hr.
Connector: 3 Pin
Weight: 410g |
| Features: |
|
1.
High density copper fins to maximize
the surface area and with high conductivity.
2. The
innovative low speed fan can reduce
the system noise and maximize the
heat exchange efficiently.
|
|
|
| DC
12V Water Pump |
Dim:
100x50x86 mm
Rated Voltage: 12V
Rated Current: 0.16A
Power Input: 2W
Water Pressure: 1.2 kg/cm2
Pump Speed: 90 L/hr
Connector: 3 Pin
Noise: 20 dBA
Bearing Type: Ceramics Bearing
Life Expectancy: 50000 hr.
Weight: 230g |
| Features: |
|
1.
Small size, low noise, low current
and high pump speed.
2. Blue LED light will be a security
to warn you if the pump is functioning
and also show you the water level.
3. Secured by “L” type
clip to minimize the vibration and
noise from motor.
4. The motor will automatically
adjust its speed from 1800rpm to
2500rpm based on the water resistance.
5. Monitor the motor speed through
the 3 Pin connector.
|
|
|
|
| Back-up
Receiver |
 |
| Back-up
Receiver stores additional water to
ensure that system is full at all
time. |
| Features: |
|
Install
with Back-up receiver
1. With the see-through Back-up
Receiver, you can check the water
at any time.
2. When the water level within the
system is decreasing, Back-up Receiver
will automatically supply the necessary
liquid to DC Water Pump.
Install without Back-up receiver
1.Back-up Receiver is not required
for AquariusIITM to operate. Users
may not wish to have additional
accessories outside of the case.
2. Users will need to check the
water level within the DC Water
Pump monthly. Refill the system
if necessary.
3. To refill the DC Water Pump,
please remove the Tube from top
part of the DC Water Pump. Then
connect the Tube from the Back-up
Receiver to it to refill.
Note: Please make sure there
are no water spills, as it might
cause serious damage to your electrical
components.
|
|
|
| Intelligent
Water Tube |
- Better
water-flow and avoid compression.
- The
spring represents the best solution
to ensure maximum water-flow.
|
 |
|
| Thermaltake
Silent Purepower (Optional) |
 |
- 300W
/360W /420W
- The
Silent Purepower assures the balance
between noise and heat exhaust.
- With
Auto Temperature Control fans.
|
|
|
| Thermaltake
HardCano Series |
- Fan
Speed Controller
- Temp.
LCD Monitor
- USB
2.0 & IEEE1394 Firewire
|
|
 |
|
| Specification
& Performance |
|
SPECIFICATION
|
|
Spec
|
Thermaltake
Xaser II all series/ ATX Tower
|
|
Technology
|
Use
Water Pump to drive water-flow and utilizing
the closed loop to enhance the heat exchange |
|
Performance
|
|
Application
for Intel P4 478, AMD XP2800+ & UP,
AMD K8
|
|
Thermal
Resistance
|
0.24
°C/W |
|
Noise
|
System
level 29 dBA |
|
|
THERMAL
PERFORMANCE
|
 |
|
| Features |
1.
New and improved DC water pump outlast the life
expectancy of traditional open water motor.
2. Designed & improved by various respectable
manufacturers and engineers to maximize water-flow,
water capacity, thermal resistance.
3. Pure copper design provides maximum heat transfer
rate. Specially processed to prevent copper oxidation.
4. DC water pump's low power consumption eliminate
the need for external power source or additional
power supply unit.
5. System is highly upgradeable. Will
work with future CPUs through simple upgrade.
|
|
|
|
|
1: 
Sections
